holly

Christmas Service

Our service department is operating as normal

Next working Day orders placed after 1pm on the 20th December will not be despatched until 2nd January 2022.

We would like to wish all customers a Merry Christmas and a Happy New Year.

Safe Installation - advice

In order to meet insurance regulations a safe weighing less than 1000 kg must be anchored. Most insurers will require fixing to a suitable brick / concrete wall or floor using a masonry fixing. Fixing to wooden flooring is not uncommon but you may need to discuss this with your insurers to make sure you meet there requirements.

Helpful tips on self Installation

  1. Place the Chubb safe in the position you have selected. Before marking or drilling any holes ensure that there are no pipes or cables present at the fixing point. If there is skirting board present this should be removed to allow the chubb safe to be fitted flush against the wall.
  2. Open the safe and remove any shelves.
  3. install guideUsing a pencil or sharp object, mark out the position of the two drilling holes; use the base or rear holes (whichever provide fixing to the stronger material)
  4. If you are base fixing in a carpeted area, we advise you cut away a small square or squares in the area where the fixing hole/s are to be drilled. This should stop you from pulling threads in the carpet.
  5. Close the safe and remove it to provide sufficient space to drill the fixing holes.
  6. Using a hammer drill – drill holes to the depth required as per your specific safe fixing instructions. A general rule of thumb when using concrete / masonry fixings is to use a drill 1mm larger than the fixing itself.
  7. Clear the drill holes and remove any debris using a hoover.
  8. Secure the chubb safe using the fixing bolts (supplied). Do this by feeding the bolt directly through the hole in the safe into the hole in the anchoring material. Use an appropriate tool, normally a socket wrench or large gauged screw driver to fully tighten the bolts in place


Alternatively you can have your Chubb Safe professionally installed by Us.

  1. Delivery and installation will be booked in advance giving you a day and a provisional time slot.
  2. When our safe crew arrive with your Chubb safe they will carry out remedial checks on your chosen safe location and advise on any potential installation problems and look for suitable alternative areas if appropriate.
  3. All our installation crews carry a variety of high quality fixings to ensure we always get the best fixing of your safe.